Net Promoter® NPS®, NPS Prism® et les émoticônes associées au NPS sont des marques déposées de Bain & Company, Inc., Satmetrix Systems, Inc. et Fred Reichheld. Net Promoter Score™ et Net Promoter System™ sont des marques de service de Bain & Company, Inc. et Fred Reichheld.
They spent a few weeks to even screw that up.
Replacing a pan gasket on a transmission is a very simple job, it took the tech 4 tries and it is still leaking. first try was to install gasket and tighten the bolts with a power nut driver, which apparently stripped the threads took it home and had a big puddle of fluid under my jeep... took it back so they could rectify the problem they said the new gasket they put on was bad... they replaced the gasket and used a power tool to start the bolts to install the pan , I was watching him do that, I told him that's not such a great idea to use a power tool to tighten bolts going into an aluminum casing, he said they do it on all vehicles to get bolts started. well He apparently stripped some bolts because when we took it home it leaked worse than when they replaced it in the beginning. Took it back to them for the third time and actually walked in on him when he was re-threading the transmission case because he said he... "Stripped another one"... this time he had put the pan on after slobbering a healthy bead of silicone instead of a gasket, took him 2 tries to get the silicone job right, because after a test drive he had to remove the pan again because he tightened the pan on with a power tool and stripped the bolts again...
so another round of re-threading the threads he stripped by using power tools and another round of silicone goes on instead of a gasket or a new pan with a better gasket, in which I had to cross the street to talk to the parts store about what they are doing wrong they printed out what they needed to do ... but apparently Middleton always knows best, right...wrong!!!
(oh by the way each time we are waiting in the front because it was such a simple job shouldn't take more that an hr to finish)
the silicone is everywhere,..it was a disaster looked like they used JB Weld and it still leaks after all that... I did complain , they said they have a great warranty to take somewhere else to do the job right....I spoke with a transmission specialist and they said";....
"Silicone should not have been used they apparently have no idea what they are doing if they couldn't of done such a simple job as that"
We will attempt to rectify horrible job done by these guys at a reputable transmission specialist using the warranty they assure us is so good, we are not counting on that since everything else has been a nightmare...
"Now they may respond that the job was done bad because I was watching them ,, that's exactly what they said,... I made them nervous watching??? that was the excuse among so many others..
It should never have taken so long to do such a simple job, ..."I Know A Guy"... Middleton's are NOT THE GUY'S...